5 KANE200
series
manual
Switching on
and off the
backlight.
Press and release PRINT / BACKLIGHT quickly to switch backlight
on or off.
Printing Data
Press for more than 1 second before releasing to start the meter
printing. The meter displays "PRINTING" until this is completed.
Make sure the printer is switched on, ready to accept data and its’
infrared receiver is in line with the meter’s emitter (on top of the
meter).
Switching
PUMP on / off
The meter normally operates with the pump on. Press PUMP
quickly
to switch the pump off and on.
When the pump is switched off, the meter displays "PUMP OFF"
approx every 30 seconds.
NOTE: the pump will not switch off if the CO reading is above
20ppm .
This helps to protect the CO sensor from damage.
“Freezing” the
display
Press HOLD / ENTER to freeze all readings. The display flashes
and can be printed by pressing PRINT key. Press HOLD / ENTER
again for “live” measurements.
Press HOLD/ENTER for more than 2 seconds to store data in
memory.
Showing CO
air free
readings (not
KANE200)
Press DOWN to scroll round the top line until
COa
is displayed
with its’ reading.
