15 KANE200
series
manual
10. ELECTROMAGNETIC COMPATIBILITY
European Council Directive 89/336/EEC requires electronic equipment not to
generate electromagnetic disturbances exceeding defined levels and have adequate
immunity levels for normal operation. Specific standards applicable to this meter are
stated below.
As there are electrical products in use pre-dating this Directive, they may emit excess
electromagnetic radiation levels and, occasionally, it may be appropriate to check the
meter before use by:
Use the normal start up sequence in the location where the meter will be used.
Switch on all localized electrical equipment capable of causing interference.
Check all readings are as expected. A level of disturbance is acceptable.
If not acceptable, adjust the meter’s position to minimize interference or
switch off, if possible, the offending equipment during your test.
At the time of writing this manual (Dec 2002) Kane International Ltd are not aware of
any field based situation where such interference has occurred and this advice is only
given to satisfy the requirements of the Directive.
This product has been tested for compliance with
the following generic standards:
EN
61000-6-3
EN
61000-6-1
and is certified to be compliant
Specification EC/EMC/KI/K200S details the
specific test configuration, performance and
conditions of use.
Please Note:
Batteries used in this instrument should be disposed of in accordance
with current legislation and local guidelines.
