Operation and Adjustment
7
1.
Attach the clip to the waistband of your clothing.
Stand on the foot rails of the TrekMill. Find the clip attached to the key and slide the clip onto
the waistband of your clothing. Next, insert the key into the console. Test the clip by carefully
taking a few steps backward until the key is pulled from the console, adjust the position of
the clip as needed. Then, remove the key from the console.
2.
Plug in the power cord.
3.
Move the on/off switch to the on position.
4.
Insert the key fully into the console.
Stand on the foot rails of the TrekMill. Attach the clip securely to the waistband of your
clothing. Next, insert the key into the console.
Before operating the console, read the following precautions.
- Do not stand on the walking belt when turning on the power.
- Always wear the clip while operating the TrekMill.
- Adjust the speed in small increments to avoid sudden jumps in speed.
- To reduce the possibility of electric shock, keep the console dry.
Avoid spilling liquids on the console.
GETTING STARTED.
