manualshive.com logo in svg
background image

Safety & Comfort Guide

 

Warning : To reduce the risk of burns, fire, electric shock, or injury to persons, read the 

  following safety and comfort guide before operating the TrekMill

.

2

1. It is the responsibility of the owner to 
ensure that all users of the TrekMill are 
adequately informed of all warnings and 
precautions.

2. Position the TrekMill on a clear, level 
surface. Do not place the TrekMill on thick 
carpet as it may interfere with proper 
ventilation. Also, do not place the TrekMill 
near water or outdoors. 

3. Do not operate the TrekMill until it is fully 
assembled.

4. Keep children under the age of 12 and 
pets away from the TrekMill at all times.

5. The TrekMill should not be used by 
persons weighing more than 300 pounds 
(120 kg).

6. Never allow more than one person on 
the TrekMill at a time.

7. Wear appropriate exercise clothing when 
using the TrekMill. Do not wear loose 
clothing that could become caught in the 
TrekMill.  Always wear athletic shoes.
 
8. Keep the power cord away from heated 
surfaces.

9. Do not operate the TrekMill if the power 
is off, if the power cord or electrical plug is 
damaged, or if the treadmill is not working 
properly.

10. Never start the TrekMill while standing 
on the walking belt.  Place feet outside of 
belt on the frame, start the TrekMill at the 
lowest speed and then step onto the belt. 
Always hold the handrails while using the 
TrekMill.

11. The TrekMill is capable of high speeds. 
Adjust the speed in small increments to 
avoid sudden jumps in speed. 

12. Never leave the TrekMill unattended 
while it is running. Remove the key, move 
the on/off switch to the off position and 
unplug the power cord when the TrekMill is 
not in use.

13. Do not change the grade of the TrekMill 
by placing objects under the TrekMill!

14. Never insert or drop any object into any 
opening.

15. Inspect and tighten all parts of the 
TrekMill regularly.

16. Danger:  Always unplug the power cord 
immediately after use, before cleaning the 
TrekMill, and before performing the 
maintenance and adjustment procedures 
described in this manual. Never remove the 
motor cover unless instructed to do so by an 
authorized service representative. Servicing 
other than the procedures in this manual 
should be performed by an authorized 
service representative only.

Warning :  Before beginning this or any exercise program, consult your physician. This is 
especially important for persons over the age of 35, expectant and nursing mothers, or 
persons with pre-existing health conditions. Read all instructions before using. Keiser 
assumes no responsibility for personal injury or property damage sustained by or through 
the use of this product.

Содержание TrekMill MM5050















Отзывы: