![background image](http://html1.mh-extra.com/html/keiser/trekmill-mm5050/trekmill-mm5050_user-manual_3925445005.webp)
5
Assembly
3.
Place a handrail
[7]
on each pipe [
8]
of the console
[4]
. Have a second person hold the handrail [
7]
in the
position shown. Insert two long handrail bolts
[9]
into
handrail through the upright. Next, insert four short
handrail bolts
[10]
down the handrail
[7]
as shown.
Tighten all of the bolts used in steps 1, 2 and 3. Insert
the large rubber caps
[11]
into the uprights
[1
].
4.
Place the channel
[12]
under the upright
[1]
and
tighten the screws
[13]
.
Note: Make sure that all parts are tight before you use
the TrekMill. Keep the included Allen wrenches in a
secure place. The second Allen wrench is also used to
adjust the walking belt.
Packing List
1.
Long Handrail Bolts - 2
2.
Short Handrail Bolts - 4
3.
Console Bolts - 4
4.
Upright Bolts - 12
(with star and plate washer)
5.
Upright Channel Screws - 8
6.
Large Rubber Cap - 2
7.
Allen Wrench - 2
8.
Safety Key - 1