Keiser M3X, Руководство пользователя

Страница: 15 / 18

LINE 7 ODOMETER/TRIP DISTANCE
For the first eight seconds when the computer is first activated, the Odometer will display the total
distance the cycle has been ridden. This feature is for service and maintenance purposes only. After
eight seconds, the Odometer will display Trip Distance.
AVERAGE CALCULATIONS
To view averages: RPM (Cadence), Power, and Heart Rate at any point in the workout, stop pedaling
for three seconds. This will flash your averages until you start moving again or until the computer
goes to sleep after 60 seconds.
RESETTING RIDE AVERAGES, ELAPSED TIME AND DISTANCE
To reset your averages during the workout, stop pedaling for three seconds and the averages will
start to flash, while they are flashing move the gear shifter from bottom to top two times quickly. This
will reset your workout information back to zero.
M SERIES COMPUTER CALIBRATION
All M Series cardio equipment is calibrated with a tool at the factory and there is no need to
calibrate, unless a component associated with the resistance mechanism or computer require
service. For more information visit: www.keiser.com/service, or contact the Keiser service
department at 1-800-888-7009 | 559-256-8000 | service@keiser.com.
COMPUTER BATTERY REPLACEMENT
To test the computer batteries rotate the crank arm until the computer “wakes up”. If the battery
is low, a “LO-BA” will display in the Odometer (ODO) display at the bottom of the computer. To
replace the batteries unscrew the back of the computer housing and remove old AA batteries and
replace with a set of two new AA batteries. If you have multiple machines, we suggest all
computer batteries be changed at the same time.
WARNING : Do not burn batteries. Do not place batteries in waste bins. Batteries must be
disposed of by a Licensed Waste Collector. Battery leakage is extremely caustic and contact
with bare skin should be avoided. In the event that battery leakage comes in contact with your
skin, flush the area for 15 minutes with copious amounts of water and seek medical attention.
Gloves, overalls, safety shoes and eye protectors must be used when handling leaking
batteries. Follow manufacturer’s recommendations when handling and maintaining batteries.
!
WARNING : The safety level of the equipment can only be maintained if it is regularly
inspected for damage and wear. Immediately replace defective parts and do not use the
equipment until all repairs have been completed and thoroughly tested.
!
UNSCREW
HERE
LIFT TO REVEAL
BATTERY AREA
14