Keiser Keiser 300, Руководство по запасным частям и обслуживанию

Страница: 15 / 46

15
TO REPLACE THE CYLINDER:
1. Put a drop of oil on the bearings and remount the cylinder. Tighten all nuts securely.
2. Reattach the air hose. Tighten the nut finger-tight, plus ¼ turn. Plug in the quick-
disconnect and check for air leaks. If the fitting leaks, tighten the nut another ¼ turn.
If the leak persists, replace the nut.
CYLINDER SERVICING
NOTICE: IT IS VERY IMPORTANT THAT THE CYLINDER ROD AND BORE
ARE NOT SCRATCHED OR DAMAGED IN ANY WAY. DAMAGED CYLINDER
RODS AND BORES ARE AREAS FOR POSSIBLE AIR LEAKS.
TOOLS REQUIRED: 11/16 wrench or socket, internal snap ring pliers, rag and Mt-55
light grease
1. Using the 11/16 wrench, carefully remove the muffler from the end housing of the
cylinder.
2. Clamp the tang of the cylinder in a vise or have someone hold the cylinder. If the
ends of the snap ring are not visible, the end housing must be rotated until both ends
are visible through the cut-out.