Keiser Keiser 300, Руководство по запасным частям и обслуживанию

Страница: 31 / 46

31
SQUAT
CYLINDER ADJUSTMENT
NOTICE: CYLINDERS ARE FACTORY-ADJUSTED AND REQUIRE NO
FIRTHER ADJUSTMENT UNLESS THEY ARE REPLACED. Please contact KEISER
if you have any questions concerning adjustments or repairs.
1. Check the condition of the rubber crutch tips that the exercise arms rest against.
These must not be worn or damaged in any way. If they are worn replace them
before attempting to adjust a cylinder.
2. Increase the resistance up and do several repetitions on the machine to assure the
cylinder is not “bottomed-out” (indicated by a sticky feeling at the beginning of the
exercise).
3. If the cylinder is not bottomed-out, check the number of threads above the jam nut.
There should be 3 to 5 threads visible. If more threads are visible, the machine will
not have a full stroke and its performance will be affected.
EXTRA WEIGHTS
1. The base of the Squat machines is provided with extra weights. If the machine must
be moved, these weights can be removed. Use an open end ½” wrench to remove the
4 bolts which mount the footpad to the bottom frame. The weights can be removed
separately. CAUTION: WEIGHTS ARE HEAVY (OVER 50 LBS.) USE CARE
WHEN LIFTING TO AVOID BACK INJURIES.
SPRING PINS
1. When installing the new spring pin (item # 62) into the adjusting drag link, bottom
(item # 56), line up the hole in the adjusting drag link, top (item # 16) with the hole in