![background image](http://html1.mh-extra.com/html/keiser/3110-series/3110-series_assembly-instructions-manual_3946842011.webp)
POWER RACK ASSEMBLY INSTRUCTIONS
11
A
NOTE: Air Compressor not required to turn on the Power Display.
Turn on the Power Display by momentarily pressing both
+
and
–
Foot Pedals.
RESISTANCE
window change from
OFF
to
CLEr
>
0
= proper connection.
Once proper connection to the Power Display has been confirmed, neatly organize the Air Lines and Communication
Wires using the Cable Tray Tabs; push any excess lines back into the Bottom Frames.
Tilt a Power Module with Bottom Frame for clearance to position and install the Bench Positioner.
B
4
POWER DISPLAY CONNECTION CHECK AND BENCH POSITIONER INSTALLATION
Power Display enters sleep mode (OFF)
after 1 minute of inactivity.
If the Power Display does not turn on,
check Communication Wire connection
points (refer to STEP 2C and STEP 3B).
Bench Positioner
Cable Tray Tabs
PLATFORM CONFIGURATIONS
: You may now
install the mounting hardware screws at the four
Anchor Points (included with Platform).
x4
Anchor Points