03
POWER RACK ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
1. Read these instructions. Keep these instructions.
2. Heed all warnings. Follow all instructions.
3.
Professional installation is required by qualified personnel
as dictated by authority having jurisdiction.
4. Safety Glasses required during assembly.
5. For easier installation and personal safety, two people are
required to assemble this equipment.
6. All hardware required for assembly of the equipment has
been provided by Keiser Corp. Use only hardware specified
by Keiser Corp.
7. Tighten all bolts and carefully examine your installation
prior to use of the Power Rack to ensure that it is securely
fastened in place.
8. Never connect Keiser pneumatic equipment to an air
source that is capable of exceeding 120 psi (pounds per
square inch) / 8.27 bar. Over pressurizing Keiser pneumatic
equipment may cause tubing to burst, breakage of
equipment, abnormal operation, or serious injury. Use only
clean, dry, regulated compressed air at the rated pressure
range of 100–120 psi / 6.89–8.27 bar.
9. Replace damaged, worn, or broken parts immediately using
only Keiser supplied components. Keep the Power Rack
out of use until repaired.
10.
Only use attachments/accessories specified by Keiser
Corporation.
11.
Failure to perform the final installation checklist before
use of the Power Rack will void the warranty and could
result in serious injury.
12. Keiser Corporation is not responsible for damage or serious
injury caused by incorrect installation, assembly, or use.
13. Use of the Power Rack or any purpose not explicitly
specified by the manufacturer will void the warranty and
could result in serious injury.
14. It is the responsibility of the facility owner or owner of
the Power Rack to instruct users on the safe and proper
operation of the equipment.
15. Users, agents, and/or anyone directing the use of the Power
Rack shall determine the suitability of the equipment for its
intended use, and said parties are specifically put on notice
that they shall assume all risk and liability in connection
herewith.
CONVENTIONS USED
This Assembly Instruction contains the following marks:
WARNING
: Indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
CAUTION
: Indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
HEAVY OBJECT
: Indicates help is required during lifting
to avoid muscle strain or back injury.
TWO-PERSON PROCEDURE
: Indicates help is required
to safely and successfully complete installation.
IMPORTANT
: Indicates information considered critical,
but not hazard-related.
Maintain safety and serial number labels. Do not remove
labels for any reason. They contain important information.
If unreadable or missing, contact Keiser Corporation for a
replacement by telephone at 1 559 256 8000, online 24/7
at keiser.com/support, or by email at [email protected].
SAFETY & SERIAL NUMBER LABELS
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
SERIAL NO.: 888888-88888
MODEL: 003110XXXX
315615
