11
HALF RACK OPERATION MANUAL
D
B
B
A
E
F
C
PROPER OPERATION CHECK
Check all fasteners around the frame and posts are properly secured. Check equipment condition and function before
every workout:
•
Display*
— press the Thumb Buttons or Foot Pedal to power on* the Display; check the Resistance window displays
the current resistance.
•
Thumb Buttons and Foot Pedals
— press to check for proper “+ / -” operation.
•
Bar Catches and Cantilever Spotting Bars
— engage and lock
properly into the post; free of excessive wear or damage.
•
Pulley Links and Cables
— cables extend/retract with
no binding and free of fray/tears, excessive wear, or
damage.
•
Pulley Carriages
— free of damage and move
freely along the track; cables route properly
around the pulleys with no binding.
•
Air Leaks
— no air leaks audible in the system.
Immediately replace damaged, worn, or broken parts.
Do not use the equipment until all repairs have been
completed and tested by a Keiser-certified technician.
Figure 6. Proper Operation Check Illustration
* “Lo-bA” = Batteries are low, replace immediately. If batteries are dead (depleted), the Power Display remains blank (see
Battery Replacement procedure, page 19).
Check and Clean Upholstery
Check the adjustable bench (if equipped, not shown) for excessive wear, rips/tears. Remove dirt/perspiration from upholstery
daily with mild soap and water solution in a spray bottle. Spray upholstered surfaces lightly and wipe dry with a clean cloth.
Inspect Attachments and Accessories
Check accessories for excessive wear or damage. Ensure all attachments fasten/engage properly to the equipment.
A
B
C
D
E
F
