
Kegel8
®
Ultra Operation Manual
9
1. Remove battery cover. Insert 1 x 9 volt PP3 battery or a rechargeable
Nickel Metal Hydride battery into the battery compartment. Replace the
cover.
2. Insert the lead wire(s) into the sockets of the unit. Lead colour is not
important. You may use one lead or both leads. If you are only using one
lead wire (for Channel A), insert the lead wire into the right hand socket
(Channel A).
3. Remove the Vaginal or Rectal electrode from its packaging.
4. Connect the Vaginal or Rectal electrode to each of the pin connectors at
the end of the lead wire. The red and black polarity are good either way.
Some probes have a long wire built-in, with the direct socket to the unit.
5. Make sure the Vaginal or Rectal electrode is clean before use.
6. Insert the Vaginal or Rectal electrode using KY jelly or any other water-
based lube (not mandatory).
A typical vaginal electrode placement diagram:
Don’t insert too deep, the neck of the probe should be just inside the vagina,the
metal plates of the probe should be fully inserted.
7. Turn on the unit by pressing the on/off button once.
8. Select the desired programme by pressing the PRG button
(please refer to the programme tables on page 11).
Quick Start Instructions
Содержание ULTRA
