Kegel8 ULTRA, Руководство пользователя, Страница: 22 / 32

Kegel8
®
Ultra Operation Manual
22
Specifi cations
STIM
1. Dual channel: individually isolated circuits.
2. Amplitude: 0-90 mA into 500 Ohm load; indication only. Actual mA
will tend to be less than indicated due to electrode impedance: at
1000 Ohms load (Electrodes in poor condition) the maximum will be
limited to 86 mA, at 1500 Ohms load the maximum will be limited to
65 mA.
3. Type: Constant Current,
maximum output voltage 180 Volts +10 / -30 Volts
4. Waveform: Symmetrical, rectangular bi-phasic with zero DC current.
5. Selectable pulse width: 50 µS – 330 µS [10% accuracy].
6. Pulse Rate selection: in the continuous mode 2 – 100 Hz
[5% accuracy].
7. Time duration of the treatment selectable: 1 minute to 90 minutes.
8. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts
the battery symbol will fl ash on/off once every second.
9. Open Electrode Detect: If an open circuit is detected at the
output of channel A or B the output current will be reset at zero.
10. Ramp up time 0.1 - 9.9 seconds.
11. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not
turn on.
Expected average battery set life [of standard 800 mAh, alkaline]:
19h.
Expected service life:
5 years. Careful use and maintenance extends the life of the unit over the
service life limit.
Environmental Conditions for use:
+5 to +40 degrees Centigrade. 15-93% Humidity.
Environmental conditions for storage & transport:
-25 to +70 degrees Centigrade, 15-93% Humidity.
Weight: 180g with battery.