Kegel FLEX 17-5701, Руководство оператора

Страница: 98 / 303

86
Now that you have determined the machine is in perfect working order, here are some tips
to common questions about lane conditioning, which should help you make proper
adjustments.
Q: What should I do if I have too much carry down?
A: Shorten the applied oil distance. Too much oil in the middle and at the end of the pattern
can cause excessive carry down. Change only the buff-out distance. Do not shorten the
pattern as this only creates more transition and possibly more moves. Make sure the
machine is cleaning properly before making any pattern adjustments.
Q: What should I do if the back ends are too strong?
A: Lengthen the pattern to tone down the back end reaction. Tamer back ends provide
predictable ball reaction and makes spare shooting much easier. Be aware of potential
carry down problems when the pattern length is increased.
Q: What should I do if I do not have enough hold?
A: The distance of the applied oil on the return pass creates hold. This area is known as the
mid-lane (from about 18-32 feet). The mid-lane provides direction to the breakpoint and
dictates the score-ability of a pattern. Starting the reverse oil loads farther down the lane
will help increase hold.
Q: What should I do if the heads hook?
A: The amount of oil in the lay down area or a lane surface in poor condition can cause the
heads to hook. In both instances the lane machine should run slower in the heads. This is
better controlled on the return oil due to the direction of travel and the rotation of the
buffer brush. Apply oil loads during the return travel that finish closer to the foul line (but
not less than 4 feet).
Q: What should I do if I have no swing?
A: The amount of oil on the outside boards or adverse lane topography can affect swing.
Reducing the length (or volume) of the applied oil will increase the amount of swing. If this
is a topography issue the pattern should be adjusted by reducing the amount of oil on the
outside boards to allow the bowlers to play a more direct line to the pocket. This should
create more area where ball reaction is concerned.
Pattern Troubleshooting