Kegel FLEX 17-5701, Руководство оператора

Страница: 63 / 303

51
Drop Brush in Reverse Location
This feature is used to choose where you want the brush to
turn on in reverse. The upper limit is the oil distance and the
lower limit is where the oil starts in reverse.
When the oil distance is changed, this value will default to
that same distance and this feature will need adjusted back
to your desired setting.
SYSTEM SETTINGS III
In SYSTEM SETTINGS III there are Walker functions that are
timed to happen as the machine moves onto the lane. It is
very important to understand what affect the numbers will
have in this screen before changing them. Be careful when
changing the values; and for each change you need to make
sure you test your machine for the desired results.
Start Applying Oil to the Brush as Machine Moves onto Lane
As the Walker moves toward the foul line the START OIL counter is monitoring travel and
counting down to start the oil. This feature is timed so the first stream of oil is applied when
the machine gets fully seated on the lane.
Adjustment to this value should not be needed, but is
available if necessary. Any change here will affect the
distance where the oil loads begin.
It is important to have this timing set properly when running
a pattern. Adjusting where the machine stops on the
approach has no effect on this adjustment.
7