Kees van der Westen Mirage Slim Jim, Руководство пользователя

Страница: 17 / 32

USER MANUAL - operation
Slim Jim User manual page 16
Note! Do not adjust the temperature of the hot water dispense by changing the temperature of the
steam-boiler. Have a technician adjust the mix-water dispense temperature by turning a set screw on
the inlet manifold (inside the machine).
Sub-menu VOLUME SETTING
In the sub-menu volume setting you can consecutively adjust the following:
parameter range factory increment unit remark
water timer 0.5 .. 15 2.0 0.1 s mixed-water is timed.
touchpad bastone
V1Gr1 70*
1 ml
With bastone units
there are only 2
programmable volumes
per group. The
positions with* are not
used.
V2Gr1 V1Gr1 110
V3Gr1 130*
V4Gr1 V2Gr1 170
V1Gr2 70*
V2Gr2 V1Gr2
15 .. 300
110
V3Gr2 130*
V4Gr2 V2Gr2 170
V1Gr3 70*
In a Duette there is no
group 3. V2Gr3 V1Gr3 110
V3Gr3 130*
V4Gr3 V2Gr3 170
Note that the volumes can also be set with the aid of the touchpads/bastone units. Only when volumes
are programmed with touchpad or bastone, the left group is dominant.
You can roughly program a shot-volume with the touchpad/bastone and then fine-tune that volume on
the control panel (increase or decrease) instead of brewing a new shot. Note that the volume shown
on the interface is the total volume that passes the flow-meter, it thus also includes the water that
remains in the coffee puck after the brew (appr. half the weight of the coffee-grinds) and the water that
flows into the pre-infusion cylinder (appr. 28 ml).
Sub-menus TIMED ON/OFF and TIME/DAY
In the sub-menu timed on/off you can consecutively adjust the following:
parameter range factory remark
auto off NO, to ECO-all, to NO HEAT NO turn automatically to stand-by
off time hh:mm time to turn to stand-by
auto on NO, YES NO turn automatically ON
on time hh:mm time to turn ON
day off none, Monday .. Sunday none skip a weekday to turn ON
This sub-menu continues into the sub-menu TIME/DAY.
In the sub-menu timed on/off you can consecutively adjust the following:
parameter range factory increment unit remark
shot time -1 .. 99 20 1 s
-1 never show shottime
0 show shot time during brew only
present time hh:mm
present day Mon..Sun
Timer function to switch the machine
The machine can automatically change state: