NOTE:
When taking the machine from the box ensure at least two people are lifting.
Remember to bend your knees and keep your back straight - this machine is heavy.
1. LEFT LEG - Slacken the bottom two screws and extend the telescopic leg to the
desired length. (This can be readjusted later). Tighten the screws to clamp
in position.
2. RIGHT LEG - Slacken the top and bottom screws in the Squaring Adjustment Block,
extend the telescopic leg by the same amount as the left leg and re-tighten the
screws.
3. Swing both legs out as far as they will go.
The first stages of assembly are carried out with the machine laying on the floor.
1
2
3 3
3.1
Assembly
3.1
Preparing the Legs
SteelTraK 210 only
