3.5
Assembly
3.5
Fitting the Wall Mounting Bracket
NOTE A: If you are going to fit the Free Standing Kit (optional) turn to the next page.
NOTE B: Ensure the wall is stable and use the appropriate fixings.
1. Lift the top end of the machine (place it on a strong stool or chair) and fit the two
M8 screws (supplied separately) through the black Top Bracket into the back of each
of the Legs. Tighten these and the adjacent two screws (four screws in all) to fix the
Legs to the top of the Main Body.
2. Fit the Wall Mounting Bracket to the top of the Main Body, fasten the screws
finger tight only.
3. Get help to lift the machine up and position it against the wall in the desired position.
4. The Wall Mounting Bracket should lay flush against the wall. Mark the position of the
two V's on each side of the bracket with a short pencil.
5. Move the machine away and remove the Wall Mounting Bracket.
6. Attach the bracket to the wall in the marked position with appropriate fixings then
reposition and fasten the machine to the bracket.
2
3
4
5
6
4
1
NB.
SteelTraK
210 only
