Using
Weightanka
2
‐
13
of
28
Assembling and Dismantling the Weightanka System
Contents
Description of correct assembly and dismantling.
Danger!
Do not use any damaged components for assembly. Always use all the components, especially
all of the weights! If the space or the load - bearing capacity at the installation site is not
adequate, do not use the Weightanka system!
Before you begin
Before you begin assembly, you must have:
a)
Checked you have all of the components (see 2.4 and Fig 1) and they are undamaged.
b)
Selected a suitable installation site.
Number of weights
Weightanka is supplied as standard with four rubber-coated base weights and either six, eight or twelve
galvanised standard weights according to the type of roof surface. In the table below, the number of
weights referred to is in addition to the four rubber-coated base weights.
Weights required on various roof surfaces.
Single Ply Membrane :
a) Smooth flat surfaces
8
b) Embossed surfaces
12
Steel Cladding :
Flat or Downhill (max 5 degrees)
8
