Using
Weightanka
2
‐
28
of
28
Markings on the products and their meaning
Various markings can be found on WeightAnka, these are located on the top cross arm and on the
galvanised weights. These markings are as follows, any queries about their interpretation should be
addressed to the manufacturer.
LABEL 1
CE0194
“CE0194” confirms that Weightanka has been CE approved to the PPE directive and
that it is subject to ongoing monitoring under arrangements monitored by notified body
No 0194 (Inspec International)
LABEL 2.
WEIGHTANKA MAY ONLY BE USED ON THE FOLLOWING SURFACES. THE ASSEMBLY MUST ALWAYS
COMPRISE FOUR RUBBER COVERED BASE WEIGHTS, PLUS ADDITIONAL GALVANISED WEIGHTS
DEPENDING ON THE TYPE OF ROOF SURFACE AS FOLLOWS:
1) SINGLE PLY MEMBRANE
a)
SMOOTH FLAT SURFACES – 8 GALVANISED WEIGHTS
b)
EMBOSSED SURFACES -- 12 GALVANISED WEIGHTS
2)
STEEL CLADDING -- 8 GALV’D WEIGHTS
3)
STONE CHIPPINGS ( BITUMEN ) -- 6 GALV’D WEIGHTS.
STONE CHIPPINGS ( MASTIC ) -- 8 GALV’D WEIGHTS
(All loose stones to be brushed)
4) MINERAL FELT – 6 GALV’D WEIGHTS
5)
ASPHALT – 6 GALV’D WEIGHTS
6)
CONCRETE – 6 GALV’D WEIGHTS
EN 795:1997 Class E DWA101/9
10/99
