Using
Weightanka
2
‐
5
of
28
The component parts depicted previously have the following names and functions:
Item Name
Function
Quantity
DW1016010
Weight Locating Pin
Locates the position of the
standard weights
The locating pins screw into the
central tapped hole of each
rubber coated base weight.
Four drilled holes are provided
at the top (unthreaded) end of
the pin. Insert the securing pin
into the lowest possible hole
according to the number of
weights being used.
Total weight of 4 weight locating
pins = 1.30 Kg
4 pieces
DW1013010
Rubber Coated Base Weights
Base plates to provide maximum
friction and / or adhesion with
the roof surface
It is important that the Rubber
Coated Base Weights are
installed with the suction cups
facing down, in direct contact
with the surface
It is important that the rubber
suction cups are maintained
undamaged and free from
contaminations such as oil,
grease or algae.
Each rubber coated base weight
has a central tapped hole to
accept the weight Locating Pin
Total weight of 4 Rubber Coated
Base Weights = 68 Kg
4 pieces
