Using
Weightanka
2
‐
25
of
28
(f) that the eyebolt/pedestal assembly has been tightened in accordance with the instructions;
(g) that a PPE warning disc has been fitted between the eyebolt and the pedestal.
(h) that two instruction labels are attached to the upper cross arm of Weightanka, and that they are
legible. Replacements are available from your Weightanka supplier.
(i) that there is no damage or defect to the Weightanka;
(j) that any recommendations for use with other components in the system, as advised on the record
card, are complied with;
(k) that there is no damage to the roof surface upon which the Weightanka stands;
(l) that neither the roof surface nor the Weightanka have been contaminated by oil, grease or any other
substance;
(m) that there is no growth of algae on the rubber base weights or on the surrounding roof surface. If
algae are present on, or immediately adjacent to, the rubber base weights, the assembly should be
dismantled, scrupulously cleaned, and re-assembled in accordance with this document;
(n) that any loose chippings have been removed where necessary.
WARNING! The lanyard MUST ONLY be attached to the eyebolt provided on the Weightanka pedestal.
See Figure . It would be dangerous to attach the lanyard to any other part of the Weightanka.
The assembly of the Weightanka is now complete.
WARNING! Should any doubt arise about the safety of any part of the system, do not use it and remove
it from service immediately.
