Intelligent Camera User Manual
39
Picture 4-9 Alarm Input
1) Go to
Settings > Event > Alarm Input
and check “Enable”. Confirm if there is a
parallel extension port and select a number from the dropdown list of Alarm Input ID
(corresponding to the connected input ID).
2) Confirm if the alarm input device is
“Always Enabled” or “Always Disabled” and that
it has connected to the alarm input port of the camera correctly.
3) Enter alarm name. If the alarm input device is always disabled, which means the
circuit is usually open, user must select
“
Always Disabled
” from the dropdown list of
Alarm Type. If the alarm input device is always enabled, which means the circuit is
