Intelligent Camera User Manual
27
default and cannot be edited. The default Op
timal Face (snapshot) Number is “one piece” and
the
other option is “several pieces”. If selecting
Head-shoulder,
the Face Output Mode can
be set as Optimal Output or Continuous Output. If selecting
Whole Person
, parameters like
Face Size, Face Output Mode, Optimal Face Number and Face Snapshot Interval will all be
disabled.
Face Angle:
Options include Front +Back and Front. If selecting Front +Back, it will detect
people both coming and going; if selecting Front, it will detect people coming only.
Face Size:
Configure face size according to the installation settings.
Face Output Mode:
Options include Optimal Output and Continuous Output, and the default
is Optimal Output. If selecting Optimal Output, it will capture optimal face snapshot only and
you can set Optimal Face (snapshot) Number; if selecting Continuous Output, it will capture
human faces continuously and you can set Face Snapshot Interval.
Optimal Face
(snapshot)
Number:
When the Face Output Mode is set as Optimal Output,
this parameter can be edited.
Face Snapshot Interval:
When the Face Output Mode is Continuous Output, the snapshot
interval can be set.
Full Image:
Enable or disable snapshot of the full image in which the target is in.
Smart Exposure:
Enable or disable the smart exposure based on human face, and it is
enabled by default. Adjust image brightness according to human face brightness.
