Intelligent Camera User Manual
25
Picture 3-7 Arming > Disarm
2) Go to
Intelligent > Intel Config > Guard Area
, select the corresponding guard area and
c
lick “
Delete
” to delete Full Area Guard.
3)
Click “
Add
” to draw guard areas in the image as required;
4)
After finishing drawing, click “
Save
”, as shown in picture 3-8.
5) After completing configuration of the guard area, it should co-work with the arming
configuration to exclude interference to the targets. Go to
Intelligent > Intel Config >
Arming
again and configure arming as needed. You can refer to the part of
Arming
.
