Intelligent Camera User Manual
26
Picture 3-8 Guard area setting
Notice:
1) The guard area should be set large enough to ensure that the whole human body
can show in the guard area.
2) You can set no more than 3 guard areas and the vertexes for each polygon of guard
area cannot be over 20.
3.3 Parameters
When there is particular requirement for person snapshot, go to
Intelligent > Intel Config >
Parameters
and set the parameters.
Scene:
Select “outdoor” for outdoor installation and “indoor” for indoor installation.
Sensitivity:
There are 5 levels of sensitivity, being 1, 2, 3, 4 and 5 respectively, 3 by default.
When there are many missing targets, a higher level is suggested; when there are many
faulty targets captured, a lower level is suggested.
Detection Mode:
There are 3 options, including Head-shWhole Person,
Head-shoulder and Whole Person. The default is
Head-shWhole Person
. If
selecting
Head-shWhole Person
, the Face Output Mode will be Optimal Output by