P30
Authorization
Operating instructions V3.22
21
© KEBA
5.2.5
RFID authorization at charging network
If the charging station: is part of a charging network (P30 c-series as slave
charging station: in a master/slave network), then all RFID cards must be
taught in on the master charging station (P30 x-series). The administration of
the permitted RFID cards for the entire charging network is carried out at the
master charging station. Information on this can be found in the specific
"Configuration Manual".
5.3
Authorization via key switch
If the charging station is equipped with a key switch, a charging procedure
can only be started by means of a key. The key is only necessary for starting
the charging procedure; after this the key can be removed, since the charg-
ing procedure is continued even without the key attached.
