P30
Introduction
Operating instructions V3.22
6
© KEBA
1.2
Purpose of the document
This document describes the operation of P30.
1.3
Requirements
This document contains information for people who want to operate a charg-
ing station.
1.4
Intended use
The charging station is intended for charging electric vehicles (such as elec-
tric cars). The connection of other devices (such as power tools) is not al-
lowed.
The charging station is suitable for indoor and outdoor use. The charging
station has to be installed vertically on a wall or on a floor-mounted column.
The surface for the installation must be flat and suitably stable (e.g. brick
wall, concrete wall). The respective national regulations must be observed
with regard to the installation and connection of the charging station.
The intended use of the device always includes the compliance with the en-
vironmental conditions for which this device was developed.
The charging station has been developed, manufactured, tested and docu-
mented in accordance with the appropriate safety standards. If the instruc-
tions and safety instructions described for the intended use are observed,
the product will normally not pose a risk to the health of persons or damage
to property.
Not observing the safety instructions can result in risk of death, in-
juries and damage to the device!
The device manufacturer assumes no liability for resulting claims!
1.5
Guarantee
Only the maintenance work expressly permitted by KEBA may be performed.
Any other manipulations to the device will also result in loss of warranty.
A device with broken warranty seals or removed lead seals may no longer
be put into operation. The necessary steps for replacement or repair of the
charging station by the specialist dealer or service partner must be initiated.
