M20
Mounting and installation instructions
V1.02
18
© KEBA 2022
5
Mounting and installation instructions
5.1
General instructions
To protect the KeContact M20 from unauthorized access, theft, vandalism
and incorrect configurations, the device must be installed in a lockable envi-
ronment (e.g. lockable control cabinet).
WARNING!
Risk of electric shock to persons!
●
The Embedded PC must always be installed safely isolated from electric
circuits with hazardous voltage.
●
The power adapter must not be made user accessible.
5.2
ESD information
Electronic component are generally put at risk by electro-static discharges
(
E
lectro
S
tatic
D
ischarge). An electro-static charge can occur during any ac-
tivity involving movement. ESD can occur with any touch.
Most discharges are so low that they are not noticeable. However, they can
nevertheless put unprotected electronic components at risk or even destroy
them. Therefore, any handling with open electronics is only permissible with
the application of effective ESD protection.
When handling
open
electronics, please follow the following ESD measures:
●
Only touch open electronics if this is absolutely necessary.
●
Wear a conductive ESD wristband.
●
Use conductive mats.
●
Establish a conductive connection between device/system, mat, wrist-
band, and grounding connection.
●
Cotton work clothes are preferred over synthetic fiber materials.
●
Keep work area free of highly isolating materials (e.g. Styrofoam, plas-
tics, nylon, ...).
●
Use ESD protection even for defective modules.
Always keep the devices in their original packaging and only remove the
packaging immediately before installation.
Avoid, for modules which are mounted in an enclosure, direct contact with
any accessible electronic components, such as non-equipped terminals.
Содержание KeContact M20
Страница 63: ......
Страница 64: ...KEBA Energy Automation GmbH Reindlstraße 51 4040 Linz Austria www keba com ...