Keba KeContact M20, Руководство по эксплуатации, Страница: 26 / 64

M20 Mounting and installation instructions
V1.02
26
© KEBA 2022
3) The KeContact M20 can be installed at various distances from the wall
using the predrilled screw holes.
4) Install the KeContact M20 on the wall.
The KeContact M20 is installed on the wall.
5.7 Removing
Dismantling from the top hat rail
Tools required:
● Phillips screwdriver PH1 (not included in the scope of delivery)
To remove the KeContact M20, proceed as follows:
1) Remove the KeContact M20 from the top hat rail.
2) Remove the mounting clip by unscrewing the three M3 screws.
3) Remove the brackets by unscrewing the four M3 screws.
4) Screw down the housing again with the M3 screws.
The KeContact M20 is removed from the top hat rail.
Dismantling from the wall
Tools required:
● Phillips screwdriver PH1 (not included in the scope of delivery)
To remove the KeContact M20, proceed as follows:
1) Remove the KeContact M20 with wall brackets by unscrewing the
screws in the wall.
2) Remove the wall brackets from the KeContact M20 by unscrewing the
four M3 screws.
The KeContact M20 is removed from the wall.