background image

E10

Directives, standards and regulations

V1.00

29

© KEBA 2023

14

Directives, standards and regulations

2014/35/EU

Low-Voltage Directive

2014/30/EU

Electromagnetic Compatibility Directive

2011/65/EU

Directive on the restriction of the use of cer-
tain hazardous substances (RoHS)

2012/19/EU

Directive for waste electrical and electronic
equipment (WEEE)

Electromagnetic compatibility

EN 61000-3-2

Electromagnetic compatibility (EMC) – Part
3-2: Limit values - limit values for harmonic
current emissions (equipment input current ≤
16 A per conductor)

EN 61000-3-3

Electromagnetic compatibility (EMC) – Part
3-3: Limit values - Limitation of voltage
changes, voltage fluctuations and flicker in
public low-power supply systems, for equip-
ment with rated current ≤ 16 A per conductor
and not subject to conditional connection

EN 61326-1

Electrical equipment for measurement, con-
trol and laboratory use - EMC requirements -
Part 1: General requirements (IEC
61326-1:2012)

EN 55011

Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics -
Limits and methods of measurement

14.1

EU Directives and Standards

2014/35/EU

Low-voltage Directive

2014/30/EU

Electromagnetic Compatibility Directive

2011/65/EU

Directive on the restriction of the use of cer-
tain hazardous substances (RoHS)

2012/19/EU

Directive for waste electrical and electronic
equipment (WEEE)

Содержание KeContact E10



































Отзывы: