1-800-KEATING
|
TOP-SIDE
TM
COOKER - SERIES PRE-2005
5
MAINTENANCE
WARRANTY REPAIRS
Keating’s warranty begins with the date of installation.
In the event that your Top-Side™ Cooker, under war-
ranty, needs repairs other than routine maintenance
or cleaning, you are required to contact Keating of
Chicago (at 1-800-KEATING) before calling a local ser-
vice company.
NOTE:
The cooking sheets are not covered under
warranty.
PREVENTIVE MAINTENANCE
Preventive maintenance should be done in daily, week-
ly, monthly and yearly intervals as necessary. Following
preventive maintenance procedures will help keep your
Top-Side™ Cooker working effi ciently. Proper care and
servicing will lead to years of quality performance.
PREVENTATIVE MAINTENANCE CHART
TIME FRAME
OPERATOR/OWNER
AT LEAST
DAILY*
• Clean all Cooking Sheets.
• Clean Miraclean® griddle surface.
AT LEAST
WEEKLY*
• Clean all surfaces of Top-Side™
Cooker.
• Wipe shaft of actuator when
fully extended with dry cloth.
• Wipe motor/shaft housing with
dry cloth.
AT LEAST
MONTHLY*
• Verify thermostat settings.
• Review cooking procedures.
• Check Cooking Sheets.
(Replace if necessary).
TIME FRAME
QUALIFIED SERVICE PERSONNEL
AT LEAST
YEARLY*
• Have Top-Side™ Cooker
completely checked, calibrated,
tested, cleaned, etc. by qualifi ed
service personnel.
*
High production facilities should be checked more often.
Contact the factory or a local service company to perform
maintenance and repairs.
Damage done to the Miraclean® surface is irreparable
and is not covered under Keating Warranty.
INSTALLING A COOKING SHEET
1. Raise Top-Side™ Cooking head completely.
2. Lay the 20" x 24" (508mm x 610mm) cooking
sheet on the griddle plate with 20" (508mm) dimen-
sion front to back.
3. Lower the Top-Side™ Cooker head onto the cook-
ing sheet, ensuring that the sheet is centered under
the head, the front edge of the sheet is even with
the front edge of the head, and the sides of the
sheet are parallel to the side of the head.
4. Fold both edges of the cooking sheet over the
head. While gently pulling the right side of the sheet
to remove any slack, fi rmly push the cooking sheet
mounting clip onto the right side mounting rib on top
of the head.
5. Repeat process on the left side.
6. Reverse the process to remove the cooking
sheet.
TIPS ON PROPER HANDLING AND USE OF COOK-
ING SHEETS
Cooking sheets should
NEVER
:
•
Be folded or creased. Be touched with sharp
objects.
•
Come in contact with griddle scrapers or abrasive
pads.
•
Be placed under other equipment or objects.
Cooking sheets should
ALWAYS
:
•
Be wiped with a damp soft cotton cloth after each
run to remove any product residue.
•
Be cleaned after the griddle is shut down for the day.
The time to change a cooking sheet is when:
•
Product starts sticking to the sheet.
•
Too much carbon build-up causes a product appear-
ance, cooking or taste problem.
•
The head surface is cool.
•
The sheet is torn or ripped.
SURFACE DAMAGE
Содержание TOP-SIDE PRE-2005 series
Страница 15: ...1 800 KEATING TOP SIDETM COOKER SERIES PRE 2005 13 WIRING DIAGRAM TOP SIDE COOKER WIRING DIAGRAM...
Страница 16: ......
Страница 17: ......