KE2 Compressor Sequencer OEM, Быстрый старт

Страница: 23 / 40

Q.2.60 March 2019
Page 23
© Copyright 2019 KE2 Therm Solutions, Inc., Washington, Missouri 63090
KE2 Compressor Sequencer OEM
pn 21768
Quick Start Guide
Remote Display
-
Variables Menu - Dual Group
When not in a menu, press or to go through the Variables abbreviations.
Press to view a Variable in real time.
Press to return to the previous screen.
Abbrev. Full Name Description
Pr1 SuCTIOn PReSSuRe - GROuP1 Group 1 Suction Pressure as read by the controller.
SU1 SuCTIOn TemPeRaTuRe - GROuP1 Group 1 Suction Temperature as read by the controller.
SA1 SaTuRaTIOn TemPeRaTuRe - GROuP1 Group 1 Saturated Suction Temperature as calculated by the controller.
SH1 SuPeRHeaT - GROuP1 Group 1 Suction Superheat as calculated by the controller.
dP1 DISCHaRGe PReSSuRe - GROuP1 Group 1 Discharge Pressure as read by the controller.
dt1 DISCHaRGe TemPeRaTuRe - GROuP1 Group 1 Discharge Temperature as read by the controller.
dS1
DISCHaRGe SaTuRaTIOn TemPeRaTuRe -
GROUP1
Group 1 Discharge Saturation Temperature as calculated by the controller.
dH1 DISCHaRGe SuPeRHeaT - GROuP1 Group 1 Discharge Superheat as calculated by the controller.
Pr2 SuCTIOn PReSSuRe - GROuP2 Group 2 Suction Pressure as read by the controller.
SU2 SuCTIOn TemPeRaTuRe - GROuP2 Group 2 Suction Temperature as read by the controller.
SA2 SaTuRaTIOn TemPeRaTuRe - GROuP2 Group 2 Saturated Suction Temperature as calculated by the controller.
SH2 SuPeRHeaT - GROuP2 Group 2 Suction Superheat as calculated by the controller.
dP2 DISCHaRGe PReSSuRe - GROuP2 Group 2 Discharge Pressure as read by the controller.
dt2 DISCHaRGe TemPeRaTuRe - GROuP2 Group 2 Discharge Temperature as read by the controller.
dS2
DISCHaRGe SaTuRaTIOn TemPeRaTuRe -
GROUP2
Group 2 Discharge Saturation Temperature as calculated by the controller.
dH2 DISCHaRGe SuPeRHeaT - GROuP2 Group 2 Discharge Superheat as calculated by the controller.
iP1 IP OCTeT 1 First three digits of the IP address.
iP2 IP OCTeT 2 Second three digits of the IP address.
iP3 IP OCTeT 3 Third three digits of the IP address.
iP4 IP OCTeT 4 Fourth three digits of the IP address.
Fir FIRmwaRe VeRSIOn Current firmware version on the controller.
Remote Display -
Setpoints Menu - Dual Group
When not in a menu, press and hold until SA is shown.
Press or to go through the setpoint abbreviations.
Press to view the current setpoint value. Press or to change the setpoint.
Press and hold to save.
For numerical setpoints, pressing once will change the digit that is being modified.
Press to return to the previous screen. When viewing a setpoint value, press to return to the previous screen without saving.
Abbrev. Full Name Min Max Default Description
SA KE2 SMART ACCESS diS EnA diS
Turn KE2 Smart Access on or off: EnA to enable / diS to disable
KE2 Smart Access.
dHC DHCP mODe diS EnA diS
Turn DHCP mode on or off: EnA to enable / diS to disable DHCP
mode.
Sy1 SySTem On/OFF - GROuP 1 oF1 on1 oF1
Allow group 1 to run or put into system off: on1 to run / oF1 to
pump down group 1 and put into system off.
Sy2 SySTem On/OFF - GROuP 2 oF2 on2 oF2
Allow group 2 to run or put into system off: on2 to run / oF2 to
pump down group 2 and put into system off.
PS1
TaRGeT SuCTIOn PReSSuRe -
GROUP1
0.0 psig 150.0
psig ①
25.0
psig ②
Target Suction Pressure - Suction pressure the controller will work
to maintain for group 1.
PS2
TaRGeT SuCTIOn PReSSuRe -
GROUP2
0 psig
150.0
psig ①
25.0
psig ②
Target Suction Pressure - Suction pressure the controller will work
to maintain for group 2.
CLA CLEAR ALARMS Press and hold ENTER to clear all active alarms.
PAS weB PaSSwORD ReSeT Press and hold ENTER to reset browser password.
①
R-410A = 300.0 psig, R-744 = 500.0 psig.
②
R-744 =250.0 psig