© Copyright 2019 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.2.60 March 2019
Page 18
KE2 Compressor
Sequencer OEM
pn 21768
Quick Start Guide
❹
Under the
Mode
drop down,
assign the proper
function to each relay and click Save.
NOTE: Do not enter the horsepower for the com-
pressor before clicking Save.
❺
If prompted for a Login, the default is the same as the
Main Board:
Username:
ke2admin
Password:
ke2admin
❻
After clicking Save, click on the relay again to change
the horsepower.
❼
Enter the correct horsepower and click Save.
Continue until all relays have the proper function
and horsepower.
❹
❺
❻
❼
Running the System
IMPORTANT:
All of the settings on the Setpoints page should be
reviewed before beginning operation (See pages 26 - 28 for detailed
explanation of each Setpoint).
When the KE2 Compressor Sequencer OEM is started for the first
time, or anytime a critical setpoint is changed, the controller enters
System Off mode.
In System Off mode, the controller will not energize any relays until
the user manually takes the controller out of System Off.
Once all setpoints have been reviewed, and the system is ready to be-
gin operation, click the yellow
button on the setpoints
page to begin running.
The button will change to
and begin operation.
Clicking this button again will put the system back into System Off.
Note: When two suction groups are used, there will be two Setpoints
pages, one for each group. Click the
icon to go to the Setpoints
page for that suction group. Each suction group is individually put
into, and taken out of, System Off.
Please make sure to review the Setpoints page of BOTH suction
groups.
