3
1
2
5
4
7
Hexa Nut /
六角形螺帽
Spring Washer /
彈簧墊圈
Carl Bolt /
卡爾螺栓
Plain Washer /
普通墊圈
Safety Wire Outlet /
保險線出口
Concrete Ceiling /
混凝土天花板
< This diagram is for viewing purpose only. > / <
Ԫყ༉ټᢎ፬Ȅ
>
4
4
Fix the Hanger Plate Assembly to the concrete ceiling and tighten the Plain Washer, Spring Washer and Hexa Nut onto
the Carl Bolt refering to the numbers given. No.1 Carl Bolt is used for Safety Wire.
安裝吊板組件至混凝土天花板並依照所給的號碼鎖緊附帶的普通墊圈、彈簧墊圈及六角形螺帽在卡爾螺栓上。 1 號卡爾螺
栓用於保險線。
CAUTION /
ݧཎ
Do not dismantle Hanger Plate
Assembly as shown in the picture
at right side.
切勿如右圖所示拆開吊板組件。
WARNING /
ឌ֙
Fix Hanger Plate Assembly correctly to the concrete ceiling, and tighten Hexa Nut fi rmly.
Can cause Ceiling Fan to drop and cause injuries.
將吊板組件正確地安裝於混凝土天花板，並鎖緊六角形螺帽。
這可導致吊扇掉落和導致受傷。
Check Point After Installation /
Ԋ၆ࡣޟ१ᘈᔮࢥ
Check /
ᔮࢥ
1. Ensure the Hanger Plate Assembly is securely fi xed on the concrete ceiling. The Carl Bolt, Plain
Washer, Spring Washer and Hexa Nut should be fi rmly tightened for safety reasons. /
確定吊板組件
已鎖緊在混凝土天花板。基於安全理由，卡爾螺栓、普通墊圈、彈簧墊圈及六角形螺帽必須鎖緊。
R48SP.indd 7
R48SP.indd 7
4/15/2013 5:20:41 PM
4/15/2013 5:20:41 PM
