- 12 -
Program Check and
The stored program check and modification are available in the following
●
Modification
manner.
1. Press the
button to choose the desired course number that you want
∧∨
to check or modify.
2. Press the PROGRAMMING button and the lamp of the Start Temp. on
the Process Indicator will blink and Start Temp. appears on the 4 digit
display.
3. Press the
button to modify the stored value and press the OK button
∧∨
to enter.
4. Press the OK button to shift to the next parameter for program check or
modification in the same way as described above.
If you turn the power off during Program Mode, this will prevent the unit from saving
any change. If you accidentally entered Program Mode or modified in error, turn the
power off as it is.
Melting Mode
■
This mode is for melting the alloy in crucible to prepare for casting.
Turn the power on and press the
button to choose the casting program
∧∨
course. The Start Temp lamp will blink and temperature is heating up toward
Start Temp. When the Start Temp is reached the lamp will stop blinking and is
illuminated.
Considering the life of muffle heater, when the muffle heat is below 212
100
,
(
℃)
the unit restricts speedy heat rise.
Note When you melt alloy make sure to use the crucible of which lamp is illuminated on
)
the Process Indicator. If wrong crucible is us
s displayed to fail
ed,
i
the melting and the cast cycle numbers will add in spite that ceramic crucible is not
being used.
Installing Carbon
To prevent alloy and debris from entering the
●
Washer
retort through the gap between crucible and
retort, the installation of carbon washer is
recommendable in the manner as shown in
the sketches.
1. Place a carbon washer in the washer guide
from under.
2. Stand a crucible bottom-side up and bring down
the washer and guide together to install.
3. Push the washer down to a distance of approx.
3mm from the crucible lip.
4. Remove the guide from the washer and crucible.
Note Do not cast with the guide installed on the crucible.
)
Crucible
Carbon Washer
Washer Guide
