Instruction
In a situation where you may not be able to
maintain a distance of at least 15 cm from other
persons, such as when your movement is
restricted, disable radio wave emission by setting
Airplane mode, turning off the product, etc.
There may be persons with an electronic medical
device such as an implanted pacemaker or implanted
cardioverter-defibrillator nearby. Radio waves might
adversely affect the operation of the electronic medical
device.
Instruction
Regarding the use of the product in a medical
institution, follow the instructions given by the
medical institution.
Failure to do so might adversely affect the operation of
electronic medical devices due to radio waves.
Material List
■
Main Unit (SHG09)
Part
Material
Surface treatment
Display surface
Reinforced glass
AF coating
Back
PC resin
Coating, print,
hard coating
Exterior
PBT resin (containing
glass)
Coating, hard
coating
Voice search key,
Volume key (UP/
DOWN), Power key
Aluminum
Anodizing
Phone key, Home key,
Mail key
PMMA
-
Periphery of Phone
key, Home key, Mail
key
PMMA + PC resin
Hard coating
Screen for earpiece,
Mobile light, Camera
fringe
PC resin
-
Camera panel
Reinforced glass
AF coating, AR
coating
Periphery of earphone
microphone jack (inner
side), Periphery of
external connection
jack (inner side)
PBT resin (containing
glass)
Coating, hard
coating
SIM card/microSD
memory card tray
(exterior)
PC resin (containing
glass)
Coating, hard
coating
SIM card/microSD
memory card tray
POM resin
-
Seal on SIM card/
microSD memory card
tray
Silicon rubber
-
Fingerprint sensor
Epoxy resin
Hard coating
Screen for speaker
Polyester resin
-
Handling Precautions
These precautions are provided to prevent product faults and to
ensure that performance can be fully demonstrated. Thoroughly read
these precautions for proper use.
■
Precautions Common to the Main Unit, Internal Battery,
Charger, SIM Card, Peripheral Devices
●
Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Sitting on the product in a pocket
might damage the display or internal circuit board resulting in a
malfunction.
Keeping an external device connected to the external connection
jack might damage the connector resulting in a malfunction. Such
damage and malfunction are not covered by the warranty, even if
there is no external damage.
●
To ensure waterproof and dustproof properties (equivalent to IPX5,
IPX8 and IP6X) of the product, use the product with the SIM card/
microSD memory card tray securely closed.
Note that the waterproof and dustproof properties are not
guaranteed in all circumstances. Do not let foreign objects such
as liquid or dust enter the product or attach foreign objects such
as liquid or dust to the charger or optional accessories. Do not
open/close the SIM card/microSD memory card tray in the rain or
with water drops on the surface of the product. Doing so might
cause water ingress resulting in internal corrosion.
Malfunctions determined to be caused by water seepage are not
covered by the warranty.
●
Do not use any of the following in extremely hot, cold or humid
places. (Use within an ambient temperature range of 5
°
C to 35
°
C
and humidity range of 35% to 85%.)
•
Main unit
•
SIM card (inserted into the main unit)
For notes when using the product in a bathroom, refer to
"Precautions when using the product in a bathroom (
z
P. 9)".
●
Do not use any of the following in extremely hot, cold or humid
places. (Use within an ambient temperature range of 5
°
C to 35
°
C
and humidity range of 35% to 85%.)
•
Charger
•
Peripheral devices
●
Do not use in places subject to lots of dust or vibration. Doing so
might cause a malfunction.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the
display. The display may be stained if splash or smear is left
attached to the surface. Wiping the product using alcohol, thinner,
benzine, detergent, glass cleaner, etc. might erase the printing on
the outer casing or cause a fault.
●
You can wipe the product with an alcohol disinfection sheet.
We had a wiping test to check chemical resistance of the product
using cloths applying the chemical (ethanol 70%) to them.
We have confirmed that the product is not discolored, faded, or
peeled off appreciably after the test assuming that it is wiped with
an alcohol disinfection sheet.
However, as we confirmed the product performance under the
test environment, we do not guarantee that the product is not
discolored, faded, peeled off, or deformed.
●
Be careful of the following when using an alcohol disinfection sheet.
•
Before wiping the product, turn off the display in advance to
avoid false operation.
•
Wring out the alcohol disinfection sheet until the solution does
not drip from the sheet to prevent moisture or liquid from
entering the gaps or openings of the product.
•
Wipe the product surface gently.
•
Check the precautions of the alcohol disinfection sheet you use
in advance.
•
Note that using alcohol may accelerate the deterioration of the
existing scratches or dents on the painted surface.
●
Use as far away as possible from landline phones, TVs and radios.
Use nearby might affect them.
●
The product may become warm while charging or during
operations. This is normal.
●
Do not place near corrosive chemicals or in places where
corrosive gas is generated. Doing so might cause a fault.
●
Do not use outside when you hear thunder. There is a risk of
lightning strikes and electric shock.
●
Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause a malfunction.
●
Do not put the product in a cooking apparatus such as microwave
oven or a pressure vessel. Doing so might cause a malfunction.
●
The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault. In addition, modification of
the product is in violation of the Radio Law and/or the
Telecommunications Business Law.
●
Do not allow a part of your body such as finger or conductive
foreign objects (metal fragments, pencil leads, etc.) to come into
contact with or to enter the external connection jack or earphone/
microphone jack. Doing so might cause a malfunction.
●
In the event that the product gets wet while charging, immediately
disconnect the plug of the specified charger (sold separately).
●
Do not use the product while driving a car or riding a motorbike or
bicycle or while walking. Use of a cell phone while driving a car or
riding a motorbike is prohibited by law. Use of a cell phone while
riding a bicycle may be punishable by some regulations.
●
Using or charging the product in a bag or when it is covered with
bedding might cause a malfunction.
●
When using a charging equipment or an external device, insert/
remove the connector straight to/from the terminal. Make sure the
orientation of the connector is correct. Unless it is correct, it might
cause a malfunction.
●
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause a malfunction.
●
Do not use, store, and leave the product in places subject to
direct sunlight (e.g. in automobiles), places that get hot, places
that get extremely cold, and in humid or dusty places. Doing so
might cause a malfunction.
●
Do not place the product on an unstable or inclined platform. Be
careful especially while charging or when vibrator is set. The
product might fall and cause a malfunction etc.
●
Do not exceed the rating of outlet or wiring device when charging
the product, for example, by starburst connection etc.
●
When the product becomes warm during use, the screen
brightness or some of its functions may be restricted.
■
Main Unit
●
The battery is built into the product and it is not user replaceable. For
replacing the battery, contact an au shop/au Style or Customer Center.
●
Do not forcefully press, tap or intentionally subject the display to
strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press sharp objects or hard objects against keys
or display surface. Doing so might cause scratching or damage.
7
Содержание BASIO ACTIVE
Страница 1: ...SHG09 ...
