•
If condensation occurs inside the camera lens or display, leave it in
room temperature until the condensation is removed.
•
Do not use the product connected to an earphone/microphone or
external device in a bathroom.
•
Do not charge the product in a bathroom.
Maintaining the Waterproof and
Dustproof Properties
■
Rubber Seal
The rubber seal on the SIM card/microSD memory card tray is
important to maintain the waterproof and dustproof properties.
Observe the following:
•
Do not remove or scratch it.
•
When closing the SIM card/microSD memory card tray, do not get
the rubber seal caught. In addition, do not insert a sharp object into
gaps around the SIM card/microSD memory card tray, the
earphone/microphone jack or external connection jack.
Doing so may damage the rubber seal, causing ingress of liquid or
dust.
•
To maintain the waterproof and dustproof properties, it is
recommended that you replace the parts once every two years
regardless of their condition (paid service). For information on part
replacement, contact your local au shop/au Style.
Precautions on Charging
The specified charger (sold separately) and optional accessories are
not waterproof/dustproof. Be sure to check the following before and
after charging.
•
Check that there is no water drop or foreign object on the product.
If a foreign object is adhered to the product, wash it away
immediately. In addition, if the product is wet, drain water well and
wipe it with a dry, clean cloth, etc. before inserting the USB Type-C
plug into the external connection jack.
•
Never connect the USB Type-C plug when the product or specified
charger (sold separately) is wet or a foreign object is adhered to it.
Although the product is waterproof and dustproof, the specified
charger (sold separately) is not waterproof or dustproof. If the USB
Type-C plug is inserted while the product or charger is wet or dirty,
water or a foreign object on the product or USB Type-C plug might
cause electric shock, short circuit or corrosion, resulting in
abnormal overheating, burnout, fire, burns or a fault.
•
Do not touch the specified charger (sold separately) with wet
hands. Doing so might cause electric shock.
•
Do not expose the specified charger (sold separately) or optional
accessories to water. Do not use them in places where water is
regularly used, such as a bathroom, shower room, kitchen and
washroom. Doing so might cause fire, burns, electric shock, a fault,
etc. In addition, do not bring them into such places even if you are
not using them for charging. Doing so might cause fire, burns,
electric shock, a fault, etc.
Washing the Product
If stain, dust, sand, soft drink, etc. is adhered to the surface of the
product, gently wipe it off with a cloth and wash the product under a
low-pressure flow of tap water (up to 6 liters/min) at room
temperature (5
°
C to 35
°
C) approximately 10 cm away from the
faucet or shower head.
Holding the SIM card/microSD memory card tray closed, wash the
product with your hands without using a brush or sponge. After
washing the product, drain water and then use the product.
•
Make sure that the SIM card/microSD memory card tray is securely
closed before washing the product.
•
Do not wash the product in a washing machine or ultrasound bath.
•
The earphone/microphone jack and external connection jack are
especially susceptible to dust, sand and other particles. Wash it
away thoroughly. After washing it away, make sure the jacks are
dried off before using the product. Any residue in the jacks may
cause a fault.
•
When cleaning the earphone/microphone jack or external
connection jack, do not use tools such as a cotton swab or push a
cloth into the jack. Doing so might cause impairment of the
waterproof and dustproof properties, resulting in fire, burns, or a
fault.
•
Never put the product in a microwave oven for drying it. Doing so
might cause the internal battery to leak, overheat, burst or ignite. In
addition, it might cause the product to overheat, emit smoke or
ignite, or destroy its circuit components.
•
Do not expose the product to hot air from a hair dryer or leave it in
a high temperature environment for drying it. Doing so might cause
the product to deform, discolor, malfunction, etc.
Washing the Product with Hand Soap
•
You can wash the product using a form type hand soap for home
use which is manufactured by a domestic manufacturer (surveyed
by SHARP CORPORATION)*. Do not use other types of detergent,
such as an alkaline hand soap, detergent for the tableware, bar
soap, powdered soap, etc.
* Performance of the product is confirmed under the test environment,
therefore, it does not guarantee that all foam type hand soaps can be
used for washing.
•
Before washing the product, turn the power off completely.
•
When washing the product, put off your watch, ring, or other
decoration such as artificial nail. Doing so may scratch the product.
How to Wash with Hand Soap
When washing the product, confirm "Washing the Product with Hand
Soap (
z
P. 10)" and perform in the following procedure.
•
Remove the commercially available accessories (terminal cover,
case, strap, etc.). For handling commercially available accessories,
refer to the notes of each product.
A
Put a foam type hand soap in your hands
→
Put
the product on your palm, and then rub the front
surface and the back surface with the foam
B
Completely rinse off the foam on the front
surface, back surface, keys, etc. of the product
•
Rinse off the foam in a position where the distance is
approximately 10 cm from the faucet or shower head, with
somewhat weak water flow (6 L/min. or less, normal
temperature (5
℃
to 35
℃
) tap water).
C
Rinse the earpiece, speaker, external connection
jack, mouthpiece/microphone, earphone/
microphone jack, and sub microphone
Earpiece
Speaker,
External connection jack,
Mouthpiece/microphone
Earphone/microphone jack,
Sub microphone
•
If substance of foam hand soap is remained on the earpiece,
speaker, mouthpiece/microphone, or sub microphone, may
cause deterioration of the sound quality of ringtone or during a
call due to clogging.
Also, those on the external connection jack or earphone/
microphone jack may cause malfunction such as charging
failure.
Thoroughly rinse it away.
D
Drain water
•
For draining water, refer to "Draining Water (
z
P. 11)".
•
Dry well and then confirm that there is no water drop remained.
10
Содержание BASIO ACTIVE
Страница 1: ...SHG09 ...
