2.8 Setup location
OPERATION IN MOBILE FACILITIES
CAUTION
Crushing hazard caused by sudden
movements
The device is unsuitable for operation
in mobile facilities (buses, trains, ships).
• The device must be adapted in order
to ensure trouble-free operation when
used in mobile facilities.
EXPLOSIVE ATMOSPHERE
DANGER
Explosive atmosphere
Operation in explosive atmospheres can
cause explosions.
• Do not operate the device in an explo-
sive atmosphere.
SALTY AIR - CONTAMINATED AIR
Salty air, contaminated air may lead to
corrosion of the housing and electrical
components.
Damage to the device
possible!
• Do not operate the device in locations
with aggressive environmental condi-
tions (e.g. air containing chlorine).
• Do not install the device at swimming
pools.
DIFFERENCE IN TEMPERATURE
Risk of damage by switching on the
power supply voltage.
When there are great differences in tempera-
ture between the transportation route and
the installation site the device shall not be
put into operation immediately after being
set up.
• Before connecting the device to the
power supply, wait at least for 2 hours.
2.9 Commissioning
DANGER
Damaged mains power cable
Risk of death or fatal injury due to electric
shock when touching a damaged mains
power cable.
• Only the manufacturer or specialized
companies may replace the mains
power cable!
Initial commissioning will be carried out by the man-
ufacturer’s own service technicians or by qualified,
trained and authorized service technicians.
The device will be handed over ready for use.
As studio operator it is your responsibility to observe
the electrical regulations applicable at the installa-
tion site. If the device has not been used for a lon-
ger period of time, then it must first be inspected by
qualified, trained and authorized service technicians,
before being put back into operation again.
2.10 Obligations of the studio
operator
• The studio operator is responsible for informing
users on possible risks of using this device.
• All danger and safety labels attached to the device
must be observed and shall not be removed!
• The device shall only be used when in proper oper-
ational condition!
• The studio operator is responsible to ensure that
the device is handled properly.
• No safety equipment shall be removed, deacti-
vated, or otherwise bypassed as it may impair the
safe operation of the device!
• The electrical installation must be equipped with
a freely accessible all-pole disconnecting device
in accordance with the overvoltage category III.
(Master switch with clearly marked on/off settings
e.g. “O” and “I” or additional indicator light). The
O p e r a t i n g I n s t r u c t i o n s
|
KBL
8
Содержание vibraNano pureEnergy 5.0
