O p e r a t i n g I n s t r u c t i o n s
|
KBL
15
6. Installation and start-up
Attention
Faultless operation can only be guaran-
teed on a low-vibration surface.
The electrical connection of the device must only be
performed by qualified, trained and authorized ser-
vice technicians.
Before switching on for the first time:
Check the device for sound condition. Never put a
damaged device into operation!
In the case of malfunctions, switch off the device and
inform Customer Service.
Store this manual so that it is always readily
accessible.
6.1 Operating modes
After switching on the mains power switch, the
device is in standby mode.
The different operating modes are explained below:
STANDBY MODE
The device is now in the idle state, i.e. it is connected
to the mains power supply but it is not being used.
The movement unit is switched off. The display
shows the program selection.
Selecting a training program and then pressing the
START/STOP button changes from the standby
mode to the training mode.
TRAINING MODE
The movement unit is switched on and a training
program is executed. A training program can be
cancelled at any time by pressing the START/STOP
button.
Содержание vibraNano pureEnergy 5.0
