4
1.0 PARTS LIST
1.
MKSM Enclosure (See Figure 1)
2.
Double Pole Single Throw (DPST) switch (See Figure 1)
*
3.
Pre-wired harness (Not Shown)
4.
Terminal grease (Not Shown)
5.
Protective boots (Not Shown)
6.
Emergency push button switch (Not Shown)
**
2.0 ITEMS NEEDED FOR INSTALLATION
1.
Battery cables (See Section 4.1 for cable recommendations)
2.
Terminals for battery cable
3.
Torque wrench with ¾ inch socket, or 11/16
th
depending
on MKSM model
4.
Minimum 16-gauge wire for harnesses
MKSM Enclosure
DPST Rocker Switch
(IP 67 Rated)
Figure 1: Parts List Items
NOTE: Not all scenarios and installation methods are covered in this document. If
your application does not match any identified in this document, please
contact KBI for assistance.
* Not included with: MKSMXXX01
** Not Included with: MKSMXXX02
Содержание KAPower MKSM Series
Страница 10: ...10 Figure 2 Typical Cable Installations ...
Страница 11: ...11 Figure 3 Six 6 Cell MKSM Material Shell 16ga SS 304 2B Cover 18ga SS 304 2B Weight 21 5lb 9 75Kg ...
Страница 17: ...17 Figure 6 Standard MKSM Schematic MKSMXXX00 Models ...
Страница 28: ...28 Figure C3 Multiple Engine MKSM Schematic For use with MKSMXXX01 Models ...
