WESII User Manual
Manual-WESII-Rev1205A
Copyright © KBC Networks 2012
Page 28 of 48
www.kbcnetworks.com
After changing the administrator username and password names, the system will
prompt another request to insert the new password and administrator username.
Enter the new administrator name and password created in order to re-access the
interface and continue with any other configuration changes. Restoring to defaults
will return the username and password to “admin” / “admin” see section 3.2.3.5. for
default settings.
System: Configuration Management
3.2.3.4
This menu option allows a backup of the WESII configurations to be created, saved
and then restored to the unit if required. It is recommended that a backup of the
WESII configuration is carried out in the event a replacement is necessary or if a
restore to defaults is required.
1.
Click on “Back Up”
2.
The web browser will bring up a notice that it can find the program online to
open it. This is not necessary, click “Save” to proceed or “Cancel” to quit.
3.
Save the configuration file as type “.cfg” to a location that can be easily
accessed when needed. In the example below, the LAN configuration of a
Client was changed to 192.168.1.235 and saved to an external disk USB
thumb drive (drive E on the computer used).
4.
To reconfigure the unit using the saved .cfg file, use the “Browse” button to
locate and upload using the “Restore” button.
If default configuration, “admin”
New password
example
: “KBC12345”
The admin username can also be changed; it does
not need to be “admin” to change the password.
