WESII User Manual
Manual-WESII-Rev1205A
Copyright © KBC Networks 2012
Page 12 of 48
www.kbcnetworks.com
50mm Hex Bolt
U Bolt
Flat washer,lock
washer,hex nut x (2)
Flat washer,lock
washer,hex nut
Remove all packaging material
Remove 50mm bolt, flat washer, locking washer and hex nut.
Mount back plate to front WESII assembly plate.
Replace flat washer, locking washer and hex nut.
Remove ‘U’ shaped bolt.
Bolt the unit to the pole.
Up/Down Alignment offers one position when using the pre-fabricated channel
lock grooves on the swivel brackets. Directional antennas may require
additional up/down alignment angles than those allowed on the pre-fabricated
grooves. To achieve different angles, remove the 50mm Hex bolt. Insert the
longer bolt and add the star washer. Re-connect and tighten.
Position the WESII unit to face the WESII unit at the other end of the link.
Carry out the alignment process – see section 2.4.8 for instructions and section
2.3.4 for LED status information.
When in the best position, tighten.
Wall
Pole