WESII User Manual
Manual-WESII-Rev1205A
Copyright © KBC Networks 2012
Page 20 of 48
www.kbcnetworks.com
The Client default LAN configuration is:
Status: Connected Stations
3.2.1.4
Details of the WESII unit accessed are recorded and appear on this status information
page. If a connected WESII device is available on the RF link, its MAC address and
other link details will also appear. This page assists in providing critical details needed
for wireless link set up, trouble-shooting and/or maintenance. Below is a screen shot
of the Status page of a Host/AP whose MAC address ends in “6a:e8:9d”
Wireless Mode:
This shows whether the unit is either set as a Client or Host/AP.
Note:
Host/APs and Clients are pre-set in the factory and cannot be changed.
MAC:
Each Ethernet device has a unique MAC (Media Access Control) address. This
number should be used to track and reference the WESII units. All single point
Host/APs are locked to one MAC only. If a replacement Client is deployed, its MAC
address must be entered into the Host/AP in order to connect.
LOCAL AP SSID:
This displays the SSID (Service Set Identifier) chosen on the
“BASIC WIRELESS” interface page.
Frequency:
This displays the frequency used for the Host/AP to connect to the
Client. The Client will connect via the Host/AP frequency selection based on either
MAC address lock and/or SSID.
Security:
This displays the encryption method selected on the “BASIC WIRELESS”
interface page.
KBC-WESII
