ASSEMBLY INSTRUCTIONS
continued
STEP 5: ATTACH THE TRAILER MOUNT TO THE ADULT (LEAD) BICYCLE
CLAMP ATTACHMENT:
1. Loosen all 4 clamp bolts (K) and remove the front plate (L) from the trailer clamp.
2. Place the copilot mount behind the adult bike with the trailer clamp against the adult bike seat post (M). The seat post should rest in the
valley of the trailer mount.
3. Place the trailer mount plate over the front of the seat post and tighten all four bolts by hand. Tighten each bolt two complete turns with
an Allen wrench.
4. Tighten all four bolts in a crisscross pattern (1, 2, 3, 4 as shown below then repeat) until they are tightened equally and the gap between
the clamp plate and the mount is even on both sides.
K
M
1
L
3
4
2
14