ASSEMBLY INSTRUCTIONS
STEP 1: HINGE ASSEMBLY
1. Grasp the lower frame (A) and rotate trailer arm (B) upwards until
the two flat plates meet and the alignment pin clicks securely into place.
2. Rotate the quick release lever over and down into the slot. Adjust
the quick release tension by rotating clockwise to tighten and
3. Before you proceed, check to be sure all parts are securely
fastened.
counter clockwise to loosen. Set the quick release lever to the
closed position.
1. HINGE CLOSED AND IN LOCK POSITION
TOP VIEW
TOP VIEW
2. ROTATE QUICK RELEASE DOWN TO UNLOCK
QUICK
RELEASE
LEVER
B
A
10