ASSEMBLY INSTRUCTIONS
continued
STEP 6: ATTACHING THE TRAILER TO THE BICYCLE
1. Insert the Co-Pilot arm (N) into the mount (O) on the adult bicycle and align the holes on each part.
2. Remove the nut from quick release pin and insert the pin into the mount and push it all the way through the hole.
3. Now thread the nut onto the pin until it makes contact with the mount. Check to see that the quick release lever (P) is in the open position.
4. Adjust the nut counter clockwise until the quick release will tighten to the closed position.
REMOVING THE CO-PILOT TRAILER BIKE
When you do not need the trailer bike attached, it is very simple to remove the bike without removing the trailer clamp.
1. Loosen the quick release lever (P) and remove the nut from the other side.
2. Slide the quick release bolt completely out.
3. Slide the Co-Pilot arm (N) out from the seat post mount (O). Replace the quick release pin and tighten.
N
O
P
15