Kaysun KPDHF-71 DN3.0, Руководство по установке

Страница: 12 / 28

installation manual
10
50
0m
m
or
m
o
re
1 The indoor unit show as Fig.4-20
2 Following Fig.4-21 twist-off the screws, along the direction of A
get off the cover plate A and cover plate B.
3 Dismounting bolt A
4 Dismounting bolt C
5
Along the direction of B and C divided the part B and part C of
indoor unit.
NOTE
During teardown and installation, the scroll was allowed direct
support by hand
Fan subassembly is more weightiness, please take careful
during teardown and installation, and keep from hurt by fan
subassembly.
6
bolt
The part A and part B of indoor unit individual put into the
position site, then install the indoor unit following
the reverse
order of step 2,3,4 and 5.
Maintenance of motor
5. INSTALLATION SPACE
Confirm that there is enough room for installation and mainte-
nance.
Maintenance roomage
Maintenance roomage
motor
assembly
bottom
cover plate
screw
Confirm the minimum
drain tilt is 1/100 or more
checking orifice
600mmX600mm
checking orifice
Fig.5-1
pothook
Fig.5-2
scroll
Fig.4-22
6. REFRIGERANT PIPE
Cover the pipe before connecting to keep rubbish, dust or other
impurities out.
Table.6-1
1 As figure dismounting the bolt of bottom, get down the bottom
cover plate.
2 As figure dismounting 6 bolts in the front plate.
3 Support the fan subassembly from the bottom, then litter up, get
down fan subassembly.
4 After finished maintenance of motor, then install the motor
assembly in the reverse order of step 1,2 and 3.
5
During this process, the indoor unit don’t need dismounted.
60
0m
m
or
m
o
re
Piping material
Copper special for air conditioner
Capaticyl(KW)
7.1/8/9/11.2/14/16/20/25/28
Piping
Gas side
Φ16mm
Liquid side
Φ9.52mm