Kaysun KCIS-52 DR11, Руководство по установке

Страница: 30 / 40

30
If the unit is not hung correctly and
a gap exists, the unit’s height must
be adjusted to ensure proper
function. The unit’s height can be
2. Remove foam stops from inside the fan.
3. Attach the side of the front grille to the
panel.
4. Connect the display panel cable to the
corresponding wire on the main body.
5. Close the front grille.
6. Fasten the installation covers at all four
corners by pushing them inwards.
(See Fig.10.6)
Fig. 10.6
Fig. 10.5
Water condensation
Fig. 10.7
Loosen upper nut
Fig. 10.8
Adjust lower nut

NOTE:
If the height of the indoor unit needs to
be adjusted, you can do so through the
openings at the
panel’s four corners. Make sure
that the internal wiring and drainpipe are not
affected by this adjustment.
Failure to tighten screws can cause
water leakage.
CAUTION
CAUTION
Pan
el
In
st
all
at
ion