Kaysun KC-FCD2-M, Инструкция по установке и эксплуатации

Страница: 18 / 24

15
2. Install support bars: Adjust the lengths of the two plastic support bars in the
accessories. Ensure that the rear cover of the wired controller stays level with the wall
when installed on the screw post of installation box (cassette type).
Screw post of the installation
box (cassette type)
Use a cutting tool to adjust the lengths
of the two plastic support bars
3. Wiring: Connect the cables according to the following wiring drawing
UP
X
Y
E A
B
GND
Low Valve 1 Valve 2 Neutral wire Medium High Live wire
485
communication
interface
(Not supported if
non-networked)
(Valve 2 is not
supported if
non-networked)